波导传感器中高效柱面波平面波转换结构的变换光学设计

基于阻抗可调的变换光学理论,设计了波导传感器中二维平面波和柱面波相互转换的光学结构。通过在虚拟空间设置合适的阻抗函数,变换介质边界上的反射得到有效消除,实现了高效的平面波到柱面波转换;转换效率将随着输入波束宽度的增加而提高。四个相似转换结构的组合,可实现高效柱面波-平面波转换,与采用传统的变换光学设计比较,基于阻抗可调变换光学理论的设计,数值模拟表明转换效率可提高约百分之六。     

Millimeter‐wave planar high gain SIW antenna using half elliptic radiation slots

This article reports a high gain millimeter‐wave substrate integrated waveguide (SIW) antenna using low cost printed circuit board technology. The half elliptic slots which can provide small shunt admittance, low cross polarization level and low mutual coupling are etched on the board surface of SIW as radiation slots for large array application. Design procedure for analyzing the characteristics of proposed radiation slot, the beam‐forming structure and the array antenna are presented. As examples, an 8 × 8 and a 32 × 32 SIW slot array antennas are designed and verified by experiments. Good agreements between simulation and measured results are achieved, which shows the 8 × 8 SIW slot array antenna has a gain of 20.8 dBi at 42.5 GHz, the maximum sidelobe level of 42.5 GHz E‐plane and H‐plane radiation patterns are 22.3 dB and 22.1 dB, respectively. The 32 × 32 SIW slot array antenna has a maximum measured gain of 30.05 dBi at 42.5 GHz. At 42.3 GHz, the measured antenna has a gain of 29.6 dBi and a maximum sidelobe level of 19.89 dB and 15.0 dB for the E‐plane and H‐plane radiation patterns. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:709–718, 2015.     

Design of a compact dual‐band folded‐waveguide bandpass filter using multilayer waveguide resonators

A novel compact dual‐band bandpass filter based on multilayer folded‐waveguide (FWG) structure is presented in this article.In this design, slots are used to realize direct coupling between adjacent resonators and apertures are adopted to implement cross coupling between non‐adjacent resonators.A new technique of external quality factor of FWG resonator and coupling coefficients between different resonators are studied using full‐wave simulator. In order to demonstrate the proposed technique, a four‐pole dual‐band bandpass filter is designed, fabricated and measured using vector network analyzer. Measurement results which are well agreed with simulation results are presented. Moreover, four‐pole substrate integrated folded waveguide SIFW dual‐band bandpass filter, using two layers of slotted folded waveguide resonators, is demonstrated. The proposed filter has a compact size and it is excellent candidate for the application of wireless communication systems. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:780–788, 2015.     

Novel ultra‐compact two‐dimensional waveguide‐based metasurface for electromagnetic coupling reduction of microstrip antenna array

A novel ultracompact two‐dimensional (2D) waveguide‐based metasurface is proposed herein and applied for the first time to reduce mutual coupling in antenna array for multiple‐input multiple‐output applications. The unit cell of the proposed 2D waveguide‐based metasurface is ultracompact (8.6 mm × 4.8 mm, equal to λ₀/14.2 × λ₀/25.5) mainly due to the symmetrical spiral lines etched on the ground. The metasurface exhibits a bandgap with two transmission zeros attributing to the negative permeability in the vicinity of magnetic resonance and the negative permittivity in the vicinity of electric resonance. Taking advantage of these two features, a microstrip antenna array is then designed, fabricated, and measured by embedding an 8 × 1 array of the well‐engineered 2D waveguide‐based metasurface elements between two closely spaced (9.2 mm, equal to λ₀/13.3) H‐plane coupled rectangular patches. There is good agreement between the simulated and measured results, indicating that the metasurface effectively reduces antenna mutual coupling by more than 11.18 dB and improves forward gain. The proposed compact structure has one of the highest reported decoupling efficiencies among similar periodic structures with comparable dimensions. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:789–794, 2015.     

波导法兰钻孔模优化设计研究

在雷达产品中,波导组件通过波导法兰盘端面的孔系进行定位连接,孔位置偏差大小直接影响波导组件装配后波导口之间的重合度。波导组件装配精度高,雷达传输系统的功率损耗小,产品电性能好。因此,优化波导法兰盘钻孔模的结构,提高法兰盘钻孔精度显得尤为重要。     

带导流墙的门槽结构在闸门全开工况下的应用

从空穴特性、流态特征方面出发,分析了带导流墙的门槽结构在闸门全开泄洪情况下改善流态、降低门槽受冲刷和空蚀危险性方面的作用,认为其在深孔泄水道闸门及其他高水头平面闸门中有很好的推广应用价值。     

嵌入式Linux和Qtopia下矩阵键盘输入的实现

详细介绍了基于嵌入式Linux和Qtopia的矩阵键盘输入实现方法。通过重载Qt的事件过滤器,结合信号和槽机制,利用两级状态处理及有效输入的界定,来简化输入过程,减少按键次数,提高输入效率。同时利用Qtopia的图形显示,使输入界面清晰,更适用于嵌入式终端设备。     

基于工控组态软件的模型参考自适应液位控制系统的设计

针对FESTO过程控制系统液位站中的液位控制问题,提出了一种利用工控组态软件和ActiveX特性扩充组态软件控制功能实现模型参考自适应控制的新方法;重点描述了控制策略、现场信号和组态软件之间的有机结合,为在工业控制领域中使用组态软件来完成复杂的控制算法开辟了新的途径;从实验结果的两组响应曲线可以看出,采用自适应控制时系统的性能指标要优于常规PID控制;因此,可以证明文中设计的自适应控制系统可以实现对液位的稳定控制;系统具有形象直观、实时性好、编程简单等特点,满足了工业控制的要求。     

A full‐color eyewear display using planar waveguides with reflection volume holograms

Abstract— A full‐color eyewear display with over 85% see‐through transmittance with a 16° horizontal field of view was developed. Very low color crosstalk, less than 0.008 Δu′v′ uniformity, and 120% NTSC color gamut were achieved. Waveguides with two in‐ and out‐coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples. The reflection volume hologram elements used on the waveguides realized a small thickness of 1.4 mm for each waveguide, and an out‐coupling reflection volume hologram used as an optical combiner contributed a high see‐through transmittance of 85% due to its wavelength selectivity. However, there are technical challenges in achieving a reasonable screen size and quality color images with optics that utilize holographic waveguides because holograms have large chromatic dispersions compared to conventional optical elements such as lenses and mirrors. Approaches to overcome these issues are described.     

A reliable QoS aware routing protocol with slot assignment for mobile ad hoc networks

A mobile ad hoc network (MANET) is a collection of mobile hosts that form a temporary network on the fly without using any fixed infrastructure. Recently, the explosive growth in the use of real-time applications on mobile devices has resulted in new challenges to the design of protocols for MANETs. Chief among these challenges to enable real-time applications for MANETs is incorporating support for quality of service (QoS), such as bandwidth constraints. However, MANETs having a high ratio of topology change make routing especially unstable; making stability is an important challenge, especially for routing having a quality of service provision. In this paper, we propose a reliable multi-path QoS routing (RMQR) protocol with a slot assignment scheme. In this scheme, we examine the QoS routing problem associated with searching for a reliable multi-path (or uni-path) QoS route from a source node to a destination node in a MANET. This route must also satisfy certain bandwidth requirements. We determine the route expiration time between two connected mobile nodes using global positioning system (GPS). Then, two parameters, the route expiration time and the number of hops, are used to select a routing path with low latency and high stability. Simulation results show that the proposed RMQR protocol have some outstanding properties when compared with Lin's [Lin C-R. On-demand QoS routing in multihop mobile networks. In: Proceedings of the twentieth annual joint conference of the IEEE computer and communications societies (INFOCOM), vol. 3(22–26), 2001, p. 1735–44], Liao's [Liao W-H, Tseng Y-C, Wang S-L, Sheu J-P. A multi-path QoS routing protocol in a wireless mobile Ad Hoc network. Telecommunication Systems 2002;19(3–4):329–47], and Chen's [Chen Y-S, Tseng Y-C, Sheu J-P, Kuo P-H. An on-demand, link-state, multi-path QoS routing in a wireless mobile Ad-Hoc network. Computer Communications 204;27(1):27–40] protocols.